easYlite-100

The easYlite-100 is designed to remotely display the status of a generator control system through a CAN BUS Interface. The easYlite-100 may be used where an additional status display is required, which is directly controlled by the generator control unit.
The system is able to provide 18 individual status displays using red LEDs. The user may assign 14 of the status displays and 4 are pre-assigned to engine alarms.
The monitored statuses are transmitted from the generator set control system to the easYlite-100. The easYlite-100 LEDs change their state if the assigned warning / alarm condition occurs or the status conditions change.
With a standard height and width of 138mm, the compact design permits easy mounting. The ergonomically designed display allows easy identification of the system status.
The CAN bus interfaces with other Woodward generator set control systems without requiring a PLC or any other device provide higher reliability and robust control in an economical package.
The annunciator is equipped with self-diagnostic checks and status LEDs to indicate the connection and power status to ease in identification of faults.
The easYlite-100 is equipped with a relay to operate an external horn or alarm.
The unit is configured with a PC/laptop via RS-232 interface.

Product Features (P/N 8446-1006):

• Fully compatible with easYgen-1000 series
• 14 configurable LED output displays (red)
• 4 pre-assigned LED output displays (red)
• Power LED (green)
• CANopen status LED indicating the communication status (green/red)
• 1 LED lamp test button
• 1 Horn silencing button
• Connection status self-check between the display module and generator set control system
• Flexible power source with 12/24 Vdc
• Flush mounting to panel front for easy monitoring
• 138 x 138 mm cutout dimension to fit most control cabinets
• Slim fit of 38mm depth to suit confined space
• Relay output for external alarm horn
• Easy configuration via PC interface

Additional Product Features (P/N 8446-1023):

• Fully compatible with entire easYgen Series
  (easYgen-1000/2000/3000)
• Configuration via ToolKit instead of LeoPC1
  
• LEDs configurable via easYgen Series LogicsManager
  

Certifications / registrations: UL/cUL, CE

Download Technical Documentation

1. To download technical documentation please register here first.
2. Already registered? Login here.
3. After successful login - return to this page and click here to start the download section.

Download LeoPC1 / ToolKit Configuration Files:

Refer to the configuration files download page for other P/Ns 

Download LeoPC1 Configuration Program

Download ToolKit Configuration Program

Top