easYgen-1000

The streamlined features of the easYgen-1000 turns this engine-generator control system into the ideal solution for your single unit application. With the flexible breaker control logic you can easily configure the easYgen-1000 for one of four operating modes - from a simple measuring transducer and engine control up to a full two-breaker, open-transition operation device. The simple automatic start/stop logic and automatic load transfer capabilities round out the features of the easYgen-1000 to cover all stand-by and emergency applications.

Features:

• FlexAppTM Technology
• Operation mode:
  Auto, Manual, Test (load & no load)
• Breaker configuration:
  GCB and MCB
• Breaker control:
  Open-close control, only open control, breaker monitoring
• Load transfer by open transition
• Start/stop logic for Diesel/gas engines
• LogicsManager to adapt programmable relays to your requirements
• Complete engine, generator, and mains protection with 3-phase true RMS AC sensing
• Multi-lingual capability: 10 languages
  English, German, French, Italian, Spanish, Portugese, Russian, Turkish, Chinese, Japanese
• Flexible and multifunctional Dynamic LCD
• True rms sensing of voltage with FlexRange
• True rms sensing of current/power
• kWh/kvarh meter
• Counters for engine starts, operating hours, maintenance call
• Event recorder (300 entries, FIFO) with real-time clock
• 8 discrete inputs / 11 discrete outputs
• 2 freely configurable analog inputs
• PC and/or front panel configurable

Communication:

• J1939 for ECU communication
• CANopen for external terminals (e.g. the IKD 1 extension card with up to 16 additional external I/Os)
• Woodward CAL protocol for configuration via PC and for the GW 4 gateway interface converter to communicate with PLCs
• Serial interfaces for configuration and interfacing with an external modem

Protection (generator/engine):

• Battery voltage
• Overspeed (ANSI# 12)
• Over/undervoltage (ANSI# 59/27)
• Over/underfrequency (ANSI# 81O/U)
• Overload (ANSI# 32)
• Reverse/reduced power (ANSI# 32R/F)
• Unbalanced load (ANSI# 46)
• Definite time-overcurrent (ANSI# 50/51)
• Inverse time-overcurrent (IEC 255)
• Calculated/measured ground fault

Typical application:

Certifications / registrations: UL/cUL, CE, GL, LR

Download Technical Documentation

1. To download technical documentation please register here first.
2. Already registered? Login here.
3. After successful login - return to this page and click here to start the download section.

Download LeoPC1 Configuration Files:

Refer to the configuration files download page for other P/Ns 

Download LeoPC1 Configuration Program

Download GetEventLog Software 

Top